M-AiroFit Basic

a Glassy Fit

Extraordinary Magnetic Force

Slim Grip with Long-lasting Transparency

Strong MagSafe

Try M-Airofit Basic now.

Extra Slim Design

The slim width of 1mm of M-Airofit Basic is thinner than the original.

Strong Magnetic Force

The extraordinary magnetic force stably holds attached accessories or car mounts.

Built-in Magnet and Excellent Protection

The magnet inside the case allows for magnetic force, and the case composed of hard PC provides excellent protection.


Main Features


Compatible models


Size Variation


HOW TO USE

How to attach M-Airofit Basic

1. Put the cell phone on the case properly.

2. Insert the case into the cell phone by applying force from the top left corner.

3. Insert the upper right corner in the same way as shown in 2, and press the middle part to fix it.

4. Insert the bottom left and bottom right corners according to their positions.

 
 

How to detach M-Airofit Basic

1. Hold the upper left and lower right corners diagonally and apply force to the lower right corner.

2. While holding the upper left corner, apply force to the lower left corner.

3. Hold the bottom of the case and gently apply force to the middle to separate it.

4. Separate the upper left and upper right corners in order to complete the separation.

 
 

Important Notice

1. We do not offer compensation for phone damage that occurred during use.

2. Please do not twist or bend the main body strongly or it may damage the magnet inside the product.

3. Magnetic force may be measured differently depending on the use environment.

4. Please be aware of discoloration due to exposure to direct sunlight. The rainbow-colored stains seen from an oblique angle are caused by the nature of the material and are not defective.

5. Too much rubbing with brightly colored fabric might cause coloration on the product.

6. For smooth attachment and detachment, the product is designed to be almost 1:1 corresponding height to the front screen. If you want to protect the screen, please use Sinjimoru tempered glass or film together. It may not be compatible with screen protection films or tempered glass of other companies.

7. There may be fine spots or bubbles due to the nature of its manufacturing process.

8. The design of this product is subject to change without prior notice.

9. The product is consumable and cannot be repaired in case of damage, wear, or contamination caused by normal use.

10. Store in high heat for a long time or over-bending may cause the magnet to detach.

11. There is a PC material sheet inside the case for magnet positioning and finishing. If the sheet is removed or broken, it cannot be used normally.

12. Because of the slim fit design in the 1:1 corresponding size, it may be difficult to wear and remove the case, and because of the nature of the hard case made of a hard PC material, damage to the edge of the device may occur when wearing or removing the case. Please be aware of how to use it on the detailed page before wearing or removing it.

13. iPhone 14 Pro and iPhone 13 Pro cannot use M-Ringo Slots due to the nature of the models, and only MagPad is compatible among Sinjimoru MagSafe car mount stands.