Sinji Car Kit

Clear Driving Vision with Sinji Car Kit

There are a few locations for adequate smartphone mounting. A smartphone that is attached to the windshield fits many vehicles, but they tend to impede the view of the driver. Car mounts that are attached to the dashboard have a tendency to detach over time, impede the view, and are often too far away to reach. Recently, a new type that can be inserted into the CD slot has been introduced. However, it interferes with the car-audio system and the center-fascia as a whole.

Sinji Car Kit is different from conventional car mounts in that it uses 3M tape (strong Korean adhesive tape) on the cradle bottom. This poses several advantages: First, 3M tape provides strong adhesion even on small surface. Second, a small surface that is about the size of two coins will provide sufficient adhesion on the dashboard or the center-fascia.  Also, the 3M tape used in Sinji Car Kit detaches easily and leaves a clean surface without any residues. Therefore, Sinji Car Kit can be attached with minimal surface area, and be installed almost anywhere.

Sinji Car Kit’s neat edge trim allows an attachment with minimal interference near the car-audio system, the vents or the center-fascia. When installed on the edge of the dashboard, as preferred by most drivers, it blocks just a tiny bit of the vent, yet provides optimum view and operating angle. If installed on the top plastic surface of the center-fascia, the 3M tape will provide a strong adhesion and stability, detach easily and cleanly, and overall take up minimum space.

Sinji Car Kit can beattached onto surfaces of dashboards or center-fascias given a total surface of two coins. Sinji Car Kit has been attached to the edge of the dashboard on straightforward dashboards as used in GM, Ford, Hyundai, and Kia vehicles. In vehicles with more sculptured center-fascias such as Toyota, Honda, and Volkswagen, this kit has often been attached to the plastic and metal surface on top of the center-fascia.

The features mentioned above of Sinji Car Kit allows it to be installed in almost all vehicles and car models, and, therefore, gives more customer satisfaction than any other smartphone car mount.

Sinji Car Kit

The optimum attaching location of Sinji Car Kit

Sinji Car Kit allows a simultaneous charging and mounting on various locations within the vehicle. This product has the special ability to attach onto a location withminimal adhesive surface. Let us review the pros and cons of this product. 

Unlike other car kits, it can be attached onto the edge of the dashboard. Thereby, it clears the view for navigation, the smartphone is within reach, and there is only minimum obstruction of the center-fascia. The disadvantages are that the car kit can weaken the adhesion, may leave a different coloration upon removal, and may leave a stain or indentation on natural leather. It is recommended to use a generous amount of adhesive tape on the cradle provided in the Sinji Car Kit in case of cars with conventional horizontal dashboards.

The second recommendation is the center-fascia. Especially in cases of complex dashboards, the driver navigation gets facilitated when the car kit is attached at this location. As most center-fascias are made of metal or plastic material, the resulting adhesion is relatively strong, and does not leave much of a stain upon removal.  The disadvantage to this would be that the phone is further away than the desirable distance from the driver. However, this solution is recommended in case of drivers with a complex dashboard line, or for those who do not use the smartphone for navigation purposes.

Sinji Car Kit can be installed on the edge of the dashboard or center-fascia. Thus, it provides the user with ​an unique convenience. Sinji Car Kit can suit the needs of drivers, regardless of the location of the mount or the model of the vehicle.

Sinji Car Kit

Universal Car Mount: Sinji Car Kit

What does the driver want when using the smartphone in the car?

If the driver uses the smartphone for navigation, he would like to use it without any disturbance of his driving vision. In case of long-distance driving, the smartphone requires charging. Also, the smartphone has to be in a convenient location to enable the driver to easily answer the phone or to listen to music. 

There are many such smartphone mounts on the market. However, since they attach to the dashboard or the windshield, they hinder the driver’s vision. In addition, they are far away from the driver. Moreover, the charging is usually done separately. Sinjimoru introduces a smartphone charging mount without all those problems. It is called “Sinji Car Kit”.

The biggest advantage of Sinji Car Kit is its one hand charging/mounting function. The charging cable is connected to the smartphone charging port to enable charging and mounting simultaneously. Additionally, it can be detached with one hand by slightly pushing it up.

Another advantage of Sinji Car Kit is that it can be attached to the front of the dashboard or center-fascia for extra convenience. High-strength 3M tape enables the attachment in even small areas, and will not leave dirty spots or residue upon detachment. Sinji Car Kit is one of the few smartphone mounts that provide so many advantages. 

Furthermore, Sinji Car Kit supports various smartphone models. The same product can be used for Apple’s 30 pin-cable or lightning cable. Android smartphones, like Galaxy S Series, Galaxy Note Series, Nexus Series, and HTC ONE, can use Sinjimoru’s micro 5 pin cable. Sinjimoru supports both the lightning cable by suppling the iPhone package and micro USB 5 pin cable by suppling the Android package, so you may continue to use Sinji Car Kit even after changing your smartphone.

All of the bove mentioned advantages of Sinji Car Kit are not found in any of the other smartphone mounts, and they will provide consumers with much convenience. If you care to replace your smartphone mount, or are looking for a mount for the first time, Sinji Car Kit is a must-have item.

Sinji Car Kit

CHARGING WITH SINJI CAR KIT

The biggest advantage of the Sinji Car all-in-one car smartphone charger/mount is that it acts as a phone charger for the car, as well as a secure mount. Let us review the components of Sinji Car Kit and the smartphones it supports.

Sinji Car Kit charges by combining the mount with the charging cable. Therefore, it comes with a lightning cable for iPhones or micro USB 5 pin cable and a smartphone charger for the car that supplies 1A of power. Other brands require the user to purchase those separately.

Both iPhones and Android smartphones can be charged simply by switching out the holders included in the Sinji Car Kit. The lightning cable and 30 pin cable for iPhones are included, so iPhone 3, 3G, 3Gs, 4, 4S, 5, 5S, and most of iPod or iPod Touch can be connected. In case of Android smartphones, a micro 5pin USB cable which was specifically made for Sinjimoru is used, so that a satisfactory charging speed can be achieved by using an 1A smartphone charger for the car. If a 2.1A smartphone charger for the car is used, the charging time can be reduced by 20%. 

As shown, we supply the most versatile and valued smartphone mount/charger at an affordable price.

Sinji Car Kit

ONE-HANDED OPERATION WITH SINJI CAR KIT

What users expect out of a smartphone mount is a one-handed operation, which enables the driver to use all needed functions like calling and navigation in the most comfortable way.

Most universal type smartphone mounts must be held with one hand while the other hand inserts the phone. This burden gets worse when the mount is placed near the windshield. Sinji Car Kit simplifies the operation by one-handed attachment and detachment. 

The science behind this convenience is that Sinji Car Kit’s charging cable holds the smartphone charging cable connector firmly in place. Simply, push the main holder upwards, with the phone below it and place the smartphone on top of the charger. 

Moreover, the used spring that holds the main holder is a plate-coil type, not a stick-type as used by conventional holders. The solid material ensures the phone's even position regardless of the location of main holder. Thus, Sinji Car Kit, unlike other brands, can even mount 5-inch smartphones like Galaxy Note Series. 

Furthermore, the location of Sinji Car Kit is closer to the driver than that of any other brand. It is easily accessible without excessive reaching or stooping, and provides high satisfaction and stability.

These 3 advantages of Sinji Car Kit provide convenience superior to any other smartphone mount, and will assist in making the future driving experience way safer.

Sinji Car Kit

SINJI CAR KIT SUPPORTS VARIOUS SMARTPHONES

By supporting various smartphones, Sinji Car Kit enjoys a high popularity in the market. Various charging cables from many different manufacturers can be fitted onto this charger/mount. Here are supported smartphones: iPhones and Android smartphones. 

Sinji Car Kit supports all of iPhones and most of iPods in mounting and charging, because it is able to accommodate Apple’s 30 pin-cable and lightning cable. These are the specific models that are compatible: iPhone 3Gs, iPhone 4, iPhone 4S, iPhone 5, iPhone 5C, iPhone 5S and most of iPods and iPod Touch. The height of iPhones is under 125mm, so the phones can be mounted even with most protective case. 

Android smartphones must meet the following criteria: Smartphones with micro 5 pin USB cable must be shorter than 6 inches (157mm), and the charging port must be on the bottom center. The compatible phones are all of Galaxy S series, all of Galaxy Note series, G2 LG, Gx, G Pro, Vu series of LG, Vega Iron and Vega Secret Up. The used micro 5 pin cable must be the one from Sinjimoru. The provided curled cable will supply a neat and speedy charging. 

Sinji Car Kit’s structural design does not allow for smartphones with side-charging jacks. In addition, the mount height capacity must be raised in order to accommodate phones taller than 6 inches. 

Despite these minor restrictions, Sinji Car Kit is the only charger/mount that supports so many iPhones and Galaxy Series, providing customers the right charger/mount for their phones. 

Sinji Car Kit

SINJI CAR KIT’S 2 PACKAGE SOLUTION

The charger/mount package of  Sinji Car Kit comes in 2 forms. The reason for the difference is that there are different cable components for iPhones and other smartphones.

The iPhone package includes a lightning cable for iPhone 5, 5S, 5C. By using the included holder, the 30 pin can be used to accommodate older versions such as iPhone 3, 3G, 3GS, 4, 4S. The kit can accommodate all charging cables supplied by Apple. Thus, in case of a phone upgrade or a switch to another brand, the user can purchase the corresponding cables and can continue using the same mount. 

When choosing the Android package, a micro 5 pin USB charging cable is included which can be used for Galaxy S Series, Galaxy Note Series, Nexus Series, HTC, and Motorola.  

Since the shape of the micro 5 pin USB cables are different from manufacturer to manufacturer, the user must use the Sinjimoru product. The micro 5 pin USB cable supplied with Sinji Car Kit is a curled cable which enables neater wiring and which was designed to provide high-speed charging with 1A power. Please note that the charging time can be reduced by 20% when using a 2.1A charger. 

The two package choice and the users’ option to purchase additional charging cables after brand switch gives the Sinji Car Kit a yet unknown versatility.